While many bumper stickers are magnetic and all you need to do to remove them is lift them off the bodywork, most bumper stickers sold today have an adhesive backing which is very strong and resistant to pretty much anything.  Sooner or later, you come across a car you really like but how sure are you that the bumper sticker proclaiming “Vote Satan” will go down well with the local church on Sundays or ever!

There are several things you can do to remove an adhesive backed bumper sticker, so follow this step-by-step guide to getting those irritating and enraging maxims of your car.

Step One

Use a lubricant to try to weaken the adhesion of the bumper sticker to the bodywork.  WD40 is ideal for this because it does not affect the color of the bodywork, provided you clean it off shortly after application.  Be careful if you use a solvent to dissolve the adhesive on the bumper sticker as they are very likely to discolor the paint job or eat right the way through it to the underlying metal body work.

Once you have applied the lubricant, try to peel the sticker off – repeat application of the lubricant to the underside of the bumper sticker so it gains maximum exposure to the adhesive – you may need to apply and reapply the lubricant in multiple stages to achieve removal of the bumper sticker.

If this does not work, move on to Step Two below.

Step Two

Apply hot water to the bumper sticker, ideally using a rag soaked in boiling water – be careful and always wear PROTECTIVE GLOVES!

This is hot work and has every capacity to hurt the user when applying the hot water so be careful to take precautions.  Make sure there are no children or family pets nearby to get in the way when you are transporting and applying the hot water.

Once applied, hold the rag for 30 seconds against the bumper sticker and attempt to peel back the sticker.  Again, you may need to apply and reapply the hot water as you peel some of the sticker away so it gets to work directly on the adhesive involved.  One tip is to work around the edge of the sticker and keep peeling it back until completely removed.

If this does not work, proceed to Step Three.

Step Three

Use a hair dryer to apply heat directly to the bumper sticker.  Heat will soften the adhesive and make it less sticky – unpeel a corner and continue to apply heat to the exposed underside as you peel away the sticker.  You can use a wooden or rubber spatula to help lift the sticker from the body work but under no circumstances should you use a sharp knife or a razor, which will simply scratch the paint job or bumper.

Step Four

Using a soft rag, apply rubbing alcohol to the remains of the bumper sticker on the car, which by now should simply be adhesive with perhaps some remnants of the sticker itself.  Use the alcohol soaked rag to remove the rest of the sticker adhesive and debris.

Step Five

Polish and wax the area where the bumper sticker was attached and buff to finish.

Related articles

• Preventing Window Strikes from Birds (labels4life.com)
• Custom Roll Labels for Small Business (labels4life.com)
• 2012 Bumper Stickers (davidscommonplacebook.wordpress.com)